Hello, Turners.
I am in a great need for advise on this product as it messed up a beautiful CA Walnut corred bowl (3 pieces).
Here is the problem: I have used this finish on other woods like Mesquite and Spalted Bradford pear with no problem, however when I tried to put it on the Walnut bowl series I am getting these streaks and blotchy spots all over it. I even contacted Rustoleum ( Watco is their brand) and told and sent pictures and no advise form them. I have called to many turners that I respect their opinions and they didn't know what to do with it. Please bear in Mind that I am a member of Alamo wood turners club as well as Hill Country Turners, Yesterday I took them to the meeting and I couldn't get much help.
I do not have the initial enons on these pieces and I am trying to resort not to making waste glue blocks and gluing them to the bowl bottoms ( chances of not getting it true on the glue block and finally sand the whole thing down to bare wood and start again. I have been hung up on this issue for more than a month and would really like to finish this project and finally send them to my daughter (has been waiting for more than a year)
Any help to save me form the grief of sanding it to the bare wood would be greatly appreciated. I try to [ost the pictures If I can figure out how.