Quote Originally Posted by Lee Schierer View Post
Yes, all you are going to do is loosen the nut at the front and then rotate the nut at the back which will move the worm.

I would suggest turning the back nut counter clockwise as you look at it from where this photo was taken.
Thanks Lee - so with the front nut, which direction loosens the nut? I was just out in the garage taking a crack at it, and I can't quite seem to get it loose. Not that it won't turn, just that either direction doesn't seem to be the right one to loosen. First time with eccentric nuts though, so maybe there's a trick to it? I went at it counterclockwise (from the perspective as seen below) and nothing really seemed to be happening. Other direction yielded similar results. The nut spins a bit, but never really seems to loosen to the point where it would be, say, "finger loose". Have the tilt wheel locked down and as close to 0 degrees tilt as possible.

IMG_8329 edited.jpg