Hi,
I have n Accuris 14 30 watt which is getting old now 2006 model. I started up the machine to do a small name tag job and the laser gave a large bang (like a balloon popping)

Everything was still running and laser light on, I sent the job and the x y did not respond properly went to the centre of the table and on return to home banged into the home spot.

I noticed that set positions on the control board would not work initially, I did the old turn off and on again and regained the working positions. I was able to complete a job without problems.

My second job was using the rotary for a bottle again worked without issue. My problem is identifying the source of the bang sound and not really trusting the machine not to screw up.

Has anyone had a similar problem or any ideas as to what could be going wrong. The Accuris has stepper motors.