Results 1 to 4 of 4

Thread: 3/4" x 10 tpi tap for live center.

  1. 01-13-2020, 6:56 PM #1
    Jonathan Bishop
    Jonathan Bishop is offline [OP] Member
    Join Date
    Apr 2018
    Posts
    3

    3/4" x 10 tpi tap for live center.

    I am looking for this tap to make stuff for my Laguna live center. Anyone know the best and cheapest one to get?

    Thx,

    Jon
    Reply With Quote Reply With Quote
  3. 01-13-2020, 7:19 PM #2
    Thomas Canfield
    Thomas Canfield is offline Member
    Join Date
    Jan 2004
    Location
    Fredericksburg, TX
    Posts
    2,576
    Check out a standard bottom tap 3/4" x10 tpi. The bottom tap will give you a deeper thread over a standard tap with tapered start.
    Reply With Quote Reply With Quote
  4. 01-13-2020, 7:37 PM #3
    Bob Coates
    Bob Coates is offline Contributor
    Join Date
    Jan 2011
    Location
    Norristown, Pa
    Posts
    270
    HD has some search "3/4 x 10 tap"
    I have also inserted/embedded pressed fit a 3/4 x 10 nut into the wood and then attached to live center.
    Grizzly also has them.
    Reply With Quote Reply With Quote
  5. 01-13-2020, 7:46 PM #4
    Robert Hayward
    Robert Hayward is offline Contributor
    Join Date
    Sep 2012
    Location
    Tampa Bay area
    Posts
    1,099
    Here is a cheapy
    https://drillsandcutters.com/3-4-10-...SABEgI1TvD_BwE
    Here is the opposite end of the $ scale
    https://www.mscdirect.com/browse/tnp...CABEgKuivD_BwE
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules