Well, getting close to completing the spray booth in my finishing room. The explosion-proof fan and louvers are installed, filtered makeup air established, but now I have a problem.
I need an approximately 72"L x 40"W plastic sheet to go over the top of the booth, between the overhead lighting (way up there) and the spraying table.
I commonly spray lacquer, so I need something that tolerates that.
Looking at chemical compatibility tables, it appears that acrylic and polycarbonate are out. Is that true for spraying as opposed to soaking in the stuff for days?
I had thin clear plastic sheeting rolls I used on my last spray booth, which did great, but I'm looking for a more permanent solution.
Are acrylic or polycarbonate sheets ok for this???
Would putting a stripable coating on it be necessary? Clear Strippable Coating/ I've never done that before.