Results 1 to 5 of 5

Thread: Anything free that works with EZcad2

  1. #1

    Anything free that works with EZcad2

    Ok gentlemen,

    I've had my cheap china laser for a few weeks and am learning the software and settings ok , of course I do not work on this full time , just a hobby at this point . The one issue that I have run into that may be kinda a problem is the software that one can use to vector logos and the like .

    I have the free version of the corel for a few more days and I believe with that program I could do all that I wanted , but for 500 a year thats seems a little spendy for a part time hobby.

    Anything out there that would perform or work with the Ezcad that doesn't cost so much ?

    Thanks and remember new guy to cad and laser here so easy to speak over my head .

    Kirk

  2. #2
    Corel draw is $500 for a license that does not expire. The subscription is $200/ year.

    inkscape is much less robust but it is free.

  3. #3
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,951
    Blog Entries
    1
    you can always buy an older version. most of us here use x7 or earlier. I'd bet you can find version for half latest version.
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
    SFX 50 Watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic 100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
    Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others

  4. #4
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,441
    I have x6 and it works fine.
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  5. #5
    I have x5 does everything I need to do
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •