I have yet another plea for help. I wrote earlier asking for advice/suggestions/recommendations on Oneway's Mega Jaws. Many who replied suggested going the vacuum chuck route instead. Which, of course, I'm now considering. I happen to have a vacuum pump made by Festool for their vacuum clamp system(VAC-SYS,) and am wondering whether it would be suitable? Here are the specs:

Technical data


Vacuum pump
 VAC PMP
Volume flow (air) max.
 124 cu.ft./h (3.5 m3/h)
Current
 2.5 A
End pressure abs.
 150 mbar
Motor speed
 3300 rpm
Ambient temperature range
 41°F-104°F(5-40°C)
Ambient pressure
 Atmospheric pressure
Weight
 20.4 lb (9.25 kg)



I'd use Oneway's chucks and adaptors, but am hoping this pump will suffice. Can anyone tell me whether it has the correct, safe pumping capacity?

Thanks again!