A knee mill really does not obviate the need for a good drill press.
A knee mill really does not obviate the need for a good drill press.
"Anything seems possible when you don't know what you're doing."
This one is my newest favorite. The main feature it has, that's different from the typical one, is an 1100 pound pull electromagnet available in the base at the push of a button. That's a 7/8" bit in the easily removable 3/4" chuck.
edited to add what I forgot to say: This one has a knob that you twist to change the variable speed. In comparison to either my multi-pulley, or my Reeves drive 1150's, the knob is a real luxury, that is worth having if you are going to change speeds to amount to anything.
Last edited by Tom M King; 01-14-2020 at 10:00 PM.