I would second Gary’s suggestion. I upgraded from a nice Chinese machine to a used speedy this summer . One of the best decisions I have made.

My old machine was faster than a glowforge but the speedy finishes most jobs 5 or 10 times faster than the old machine. If you are using the laser to make money it’s an easy choice. If you are just having fun its a much more complicated decision.

Not sure what the used market is around you but it might be worth looking into as well. If you do end up with the speedy get at least 80w. Any less and you don’t have enough laser power to max out the speed. Might not matter all that much to you right now, but they do retain a lot of value and it will impact resale.