I'm restoring antique hand plane totes and knobs, stripping them to the bare wood, finishing with a few coats of shellac for durability, a coat or two of lacquuer for authentic finish followed by a critical coat of paste wax or Renaissance wax to shine it up and further give protection. Problem is after the wax coat, I get white spots and splotches on the finish (and even into the finish, though it's dried for three days). Ive used shallac independently with wax so it's not the shellac that's the problem. Any ideas or solutions? Once the white spots appear, the only fix is to re-strip and omit the wax, which is a key ingredient to the finish. Thanks!