The dust collection on my 20” dust collector is horrendous. Curios to see if anyone has improved this and how?
56C6E28E-B3D5-4BEA-A8FC-C5345701A418.jpg
65BD88E5-0DD6-4075-B992-8311295150CC.jpg
The dust collection on my 20” dust collector is horrendous. Curios to see if anyone has improved this and how?
56C6E28E-B3D5-4BEA-A8FC-C5345701A418.jpg
65BD88E5-0DD6-4075-B992-8311295150CC.jpg
The pattern shop my 37" dual disc sander came out of, added a bunch of extra ports at the bottom an actually made a hood that pulled from the top as well.
Replace that dinky dust collection fitting with a 4" round to rectangle fitting (6" would be better). You could probably find something close in the HVAC aisle at your local borg. It's all about volume.
F711D470-A24D-4D6A-8AAB-6509F809DEC9.jpg
4” pipe with slot cut in top and left end mostly closed with tape. Works pretty well.
Steve Jenkins, McKinney, TX. 469 742-9694
Always use the word "impossible" with extreme caution
My 15” Oliver picks up well with a 4” duct. Looking at your picture it seems like the outlet is on the wrong side if the disk is rotating clockwise.
453F604F-E151-479F-8631-33D2AEC6864A.jpg