I have a couple of questions for those of you who've used Arm-R-Seal Satin. I have a dining table top of white oak. It's been stained and the top surface has 4 coats. IMO it looks good, but am considering a paste wax over the Arm-R-Seal. Can I choose pretty much any furniture paste wax, or are some better than others when used with this varnish?

My second question is regarding the bottom of the table. So far I only have one coat of Arm-R-Seal on it. The plan was to give it 3 total, but it looks like I'll be running out before that. Can I use some Minwax Wipe-on Poly that I have on hand, over the Arm-R-Seal? Obviously I'm not concerned about the look since you won't really see it, but I just want to make sure that wouldn't degrade the protectiveness.

Thanks!

20191205_190605.jpg