I’ve had the incra mast-r- lift II for better than 10 years now, works great. I use it daily.
Imo the speed thing is a non issue.
I’ve had the incra mast-r- lift II for better than 10 years now, works great. I use it daily.
Imo the speed thing is a non issue.
Bumbling forward into the unknown.
Brian,
I guess we can compensate for speed control with feed rate to some extent, as long as we avoid burning (with large diameter bits).
I thought the speed knob was set in the narrowest part of the router.
Don't think so. All I can say is that I have that router and that lift, and I didn't have to remove anything from the router to mount it. The switch is mounted 90 degrees from the posts.
Here's a picture of one mounted in an Incra Mast-R-Lift:
INCRA-Mast-R-Lift-II-3T.jpg
That's how mine is oriented. I don't know why Woodcraft would mount it so that the switch has to be removed.