I've seen people clamp a mitered box with painters tape. And I've read that if you're using plywood you can glue miters with no additional reinforcement. I've been slightly sceptical about both claims. So yesterday I tried it.
It works. Put the box in clamps this morning and couldn't pull it apart. This is going to open up some nice possibilities. One of the things I do is make urns for people that need them for a loved one or a pet. They're provided at no charge. Up until now I've been building them out of solid wood. But recently I picked up a vacuum veneering system and this is opening up a lot of nice things I can do with veneer. And being able to build the box like this simplifies things a lot.
Is there anything I'm missing that could cause issues a few years down the road?
Cliff