Menards shaper?

[Alan Muller]

I recently bought this for $25.

It's obviously a very light duty shaper and may not be worth bothering with. I can't find any info on it.

It's marked:
Menards Wood Shaper Made in Taiwan
SKU NO. 240-2790
Model KDS25-4001
1/2 hp
etc

Anybody run into one of these? Or know where to find some info on them?

Thanks.

[David Larry Smith]

did you get any info on instructions on your menards shaper----I also have one without instructions on how to adjust the height of the spindle---thanks Dave

[Matt Day]

FYI, this thread is 6 years old and the OP hasn’t been active since 2016. Good luck though, never knew Menards had a shaper

[David Larry Smith]

FYI, this thread is 6 years old and the OP hasn’t been active since 2016. Good luck though, never knew Menards had a shaper

I realized it was an old thread and there weren't any replies----I figured out how to adjust the spindle height----Menards had many wood and metal working machines in the old days---I have a good milling machine also that I still use---Dave