Results 1 to 2 of 2

Thread: FS: Grizzly G0555LANV 14" Bandsaw with blades and upgrades

  1. #1
    Join Date
    Jun 2017
    Location
    Landenberg, Pa
    Posts
    229

    FS: Grizzly G0555LANV 14" Bandsaw with blades and upgrades

    For sale here is my Grizzly G0555LANV 30th Anniversary 14" Bandsaw. It has maybe 2-3 hours on the motor. I upgraded it with the riser block kit (the correct one that went specifically with this special edition saw) so it runs 105" blades, and I installed the Carter guide upgrade kit (see pic). I am including two blades, both of them nearly new - 1/2-in 3TPI Timber Wolf resaw blade, and a 3/16-in 10TPI Timber Wolf general purpose blade. Over $850 invested - I am asking $500 firm, and I'm listing it elsewhere for more, but I will let it go for $500 for fellow creekers. I am in southern Chester county, Pennsylvania, and I can help you load up. It really isn't that hard to move around. We can disassemble if need be.

    I have no complaints on the saw, I just need to go bigger for my needs. The upgraded Carter guides are really quite nice compared to stock and made blade changes a trivial affair. Not so much with the stockers. I will include all the original books, all the original parts replaced in the upgrades, all the various allen keys for manipulations, and a ShopFox heavy duty mobile base. Everything is like-new. I have more pics if you need, but I think you get the idea below. Note that blade is not tensioned in photos, I never store it tensioned.

    Original specs:

    Computer-balanced cast-iron wheels (this is an upgrade from the regular G0555)
    Sturdy T-shape fence design
    All ball bearing construction
    Cast-iron frame
    Precision-ground cast-iron table
    Computer balanced cast-iron wheels with rubber tires
    4" dust port
    Upper and lower ball bearing blade guides and thrust bearings (upgraded to Carter guides, but you take the stock parts with it too)
    Open frame stand
    Miter gauge
    Rack-and-pinion guide post adjustment for upper blade guides
    Specifications:


    Motor: 1 HP, 110V/220V, single-phase, TEFC, 1725 RPM, prewired 110V
    Amps: 11A at 110V, 5.5A at 220V
    Table size: 14" x 14" x 1-1/2"
    Table tilt: 45 deg. right, 10 deg. left
    Floor to table height: 43"
    Cutting capacity/throat: 13-1/2"
    Maximum cutting height: 6"
    Blade size: 93-1/2" (1/8" to 3/4" wide) - upgraded with riser, now takes 105", but I have all the original parts so you can revert to stock if you like.
    Blade speed: 1800, 3100 FPM
    Overall dimensions: 27" wide x 67-1/2" high x 30" deep
    Approximate weight: 247 lbs.

    Click image for larger version. 

Name:	bs1.jpg 
Views:	73 
Size:	173.8 KB 
ID:	419955Click image for larger version. 

Name:	bs2.jpg 
Views:	44 
Size:	186.5 KB 
ID:	419956Click image for larger version. 

Name:	bs3.jpg 
Views:	35 
Size:	202.3 KB 
ID:	419957Click image for larger version. 

Name:	bs4.jpg 
Views:	41 
Size:	93.3 KB 
ID:	419958Click image for larger version. 

Name:	bs5.jpg 
Views:	36 
Size:	156.4 KB 
ID:	419959Click image for larger version. 

Name:	bs6.jpg 
Views:	33 
Size:	138.9 KB 
ID:	419960Click image for larger version. 

Name:	bs7.jpg 
Views:	36 
Size:	106.9 KB 
ID:	419961Click image for larger version. 

Name:	bs8.jpg 
Views:	31 
Size:	172.2 KB 
ID:	419962

  2. #2
    Join Date
    Jun 2017
    Location
    Landenberg, Pa
    Posts
    229
    Bandsaw is sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •