Keller dovetail jig repair

[Robert Cherry]

Agreed, JB Weld would be a good option for this repair.

[Mark e Kessler]

I asked the same question to David Keller recently, below is his parsed response.

”...It is, then, important to keep the template edges clean and intact. However, a minor knick in either the aluminum or phenolic plate can be repaired, filling it with a high-density epoxy putty such as J-B Weld. It makes an excellent and long-lasting repair”

[Bill Dufour]

JB weld worked on the aluminum guide finger of my jig.
Bill D

[Maurice Arney]

I asked the same question to David Keller recently, below is his parsed response.

”...It is, then, important to keep the template edges clean and intact. However, a minor knick in either the aluminum or phenolic plate can be repaired, filling it with a high-density epoxy putty such as J-B Weld. It makes an excellent and long-lasting repair”

Straight from the "horses mouth."

Seems like a consensus!

Thanks everyone!