I have a 3 hp Oneida dust control system with remote control. Unit is about five years old and I now have the replace the second remote Control switch relay kit($78.00). Anyone know if there are any after market kits available other than Oneida.
I have a 3 hp Oneida dust control system with remote control. Unit is about five years old and I now have the replace the second remote Control switch relay kit($78.00). Anyone know if there are any after market kits available other than Oneida.
We've been using the PSI Long Ranger remotes with good results
Chuck
I can't remember..... I do have the Lone Ranger set up, and I think I got it from Penn State. I don't think Oneida had one when I got my 3 hp unit, maybe 17 years ago. I do have 2 of the remotes. The one in the flat work area floats around. The one in the turning area is on a clip on the wall. Lost one in the shavings once...
robo hippy
I had to go with a contactor for 220V and used a 110V remote outlet to power the contactor. I had some interference from the frequency/speed control on Powermatic 3520B lathe causing the 220 remote from Oneida to come on by itself. Just the last couple of weeks, the 110 remote stopped working and I bought 3 remote controlled outlets with 3 channel control from Amazon and it has worked even better than earlier. I found a use for the other 110V outlets for hard to reach fans, and almost wish I bought the 6 unit offered by Amazon.