Results 1 to 7 of 7

Thread: Help on selection of a laser engraver

  1. #1
    Join Date
    Nov 2019
    Location
    West Tennessee
    Posts
    1

    Help on selection of a laser engraver

    I am planing to purchase a 60 to 100 watt Chinese laser engraver in the next few weeks and would like some recommendations on brand and vendor selection from people
    who have some experience. I have been reading a lot and watching a few videos on the subject. From my studies it appears the the RUIDA controller is desirable and ORION
    and MOPHORN are good brands. I will purchase from someone who has an office in the US.

    Please tell me if you feel any of the above is incorrect. Recommend another brand or a vendor. Any comments or recommendations will be appreciated. THANKS!!!!!
    Last edited by Mitchell Bennett; 11-16-2019 at 12:35 PM.

  2. #2
    Michael
    Welcome to SMC. You should have a look at the Trotec import. I have not seen it and don't know the price but I understand the software is better than the masses of Chinese built machines. Trotec support would be a big plus for me.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  3. #3
    Try Rabbit USA, I have 2 Rabbits lasers for over 10 years, they, like any laser they will
    go down, You can get parts in US.
    joe

  4. #4
    Join Date
    Sep 2009
    Location
    Medina Ohio
    Posts
    3,824
    My first one came from Automation Technologies and my second one I bought off E bay that had them in stock. I payed about $4000 for the first one shipped it is a 60 watt 12 x 20 bed with just a water pump and fan. It took a week to get it. The second one is a 130 watt with a 36 x 24 bed that came with a CW5000 chiller a rotary and fan for $4500 and it came in 3 days

  5. #5
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,061
    I've had my Rabbit USA laser going on 5 years still on the original 60 watt tube. Haven't had much trouble at all. Ray Scott owns Rabbit USA in Ohio and give excellent support. These machines are built like a truck and priced well below the big 3.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  6. #6
    Have a look at the Aeon Brand, I have one of their smaller machines a Mira 5 with a 30w RF Tube, their build quality is on another level compared to the other two Chinese CO2 lasers I have. I have just placed an order with the factory for a Nova 10, 100w 1000x700mm machine.
    Shenhui SG350 fitted with a 60w tube.
    JQLaser 9060 with 90w tube.
    Mira 5030 30w RF tube.
    20w Fiber Laser.
    50w Fiber Laser.
    Located in the Isle of Man, which isn't in the UK but almost surrounded by it.

  7. #7
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    13,303
    Read First

    There are hundreds of threads here concerning this topic. Yours is one of the more difficult decisions you will ever make simply because of the variety of machines available, the cost, your particular needs and the technology involved. Do yourself a favor and invest your time here and research your question. The truth is that nobody can answer this question for you but you can get all of the information you need right here if you spend the time.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •