hi all
today il finished my first 83cm oak cylinder
please see attached likt to the video
https://youtu.be/yRSikrgn_kw
Best Regards
roger
IMG_20191109_140231.jpgIMG_20191103_100136.jpgIMG_20191109_144300.jpgIMG_20191109_144311.jpg
hi all
today il finished my first 83cm oak cylinder
please see attached likt to the video
https://youtu.be/yRSikrgn_kw
Best Regards
roger
IMG_20191109_140231.jpgIMG_20191103_100136.jpgIMG_20191109_144300.jpgIMG_20191109_144311.jpg
Very nice, Roger. Thanks for the video. Can you tell us a bit about your lathe and the tooling you used for this piece?
sorry for my english
il use a pitbull (is a tool from ändu from swizerland) and woodcut, on a linear guid
best regards
roger
sorry for my english
il use a pitbull (is a tool from ändu from swizerland) and woodcut, on a linear guid
best regards
roger