Results 1 to 12 of 12

Thread: Need Turkey Feather cdr vector

  1. #1
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068

    Need Turkey Feather cdr vector

    Does anyone have a decent turkey feather vector in cdr or dxf. they would share
    I've looked here and on the net. what I find is not usable or at least I can't make them usable.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  2. #2
    Quote Originally Posted by Bert Kemp View Post
    Does anyone have a decent turkey feather vector in cdr or dxf. they would share
    I've looked here and on the net. what I find is not usable or at least I can't make them usable.
    Maybe this will work - Ralph
    Attached Files Attached Files

  3. #3
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068
    Thanks but I need a Turkey Feather
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  4. #4
    Join Date
    Oct 2007
    Location
    Cincinnati, Ohio
    Posts
    1,843
    Still need that turkey eather? If this one will work, I'll put it in a .cdr for you. Which version?
    Attached Images Attached Images
    Tim
    There are Big Brain people & Small Brain people. I'm one of the Big Brains - with a lot of empty space.- me
    50W Fiber - Raycus/MaxPhotonics - It's a metal eating beast!
    Epilog Fusion M2 50/30 Co2/Fiber - 2015
    Epilog Mini 24 35watt - 2006 (Original Tube)
    Ricoh SG3110DN
    - Liberty Laser LLC

  5. #5
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068
    Quote Originally Posted by Tim Bateson View Post
    Still need that turkey eather? If this one will work, I'll put it in a .cdr for you. Which version?

    This is what I'm looking forturk 1.jpgbut in a vector format BXW so I can engrave it. I found it but it has like a million nodes . I need something simple that will look like this in BXW
    turk2.jpgthis is what it looks like no fill LOL
    Last edited by Bert Kemp; 11-12-2019 at 2:16 AM.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  6. #6
    Try these Bert-- I made a positive and a negative version, Corel 9 job is below...
    This is why I keep my 24 year old Casmate around...

    tfsh.jpg
    feather.cdr
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  7. #7
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068
    Quote Originally Posted by Kev Williams View Post
    Try these Bert-- I made a positive and a negative version, Corel 9 job is below...
    This is why I keep my 24 year old Casmate around...

    tfsh.jpg
    feather.cdr

    Kev Your the MAN I think this will work will see how it looks engraved tomorrow Thanks.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  8. #8
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068
    Engraved awesome thanks again KevTurkey Feather.jpg
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  9. #9
    Only too glad to help!

    Whaddya engravin', actual turkeys?
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  10. #10
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068
    Leather Knife case for a buck 110
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  11. #11
    Join Date
    Dec 2012
    Location
    Arizona
    Posts
    4,068
    well after a week of hunting and getting the help from Kev to get that feather to engrave the guy doesn't like it because its a wing feather and not a Tail feather. He never said he wanted a tail feather. so sc** him Im done with this guy
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  12. #12
    funny- (or not) -- you should post this in the 'special customers' thread in the off topic section!
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •