Finishing is my least favorite job in woodworking but all the jobs I get for money are refinishing jobs. I have an antique cabinet I’m working on now with really crappy finish which is gonna have to be completely stripped. All the drawers have inset panels and there’s a lot of grooves so sanding by hand would take awhile. I was thinking of sandblasting which I haven’t done on wood before. I use playground sand for blasting so it’s a relatively fine media. I was thinking as long as I keep a good distance from the wood it shouldn’t dig much, and I know it will make the wood fuzzy but I figure I can touch it up with sandpaper. My concerns are the sand roughing up the wood too much and making it a harder project or sand getting lodged in the wood. Any thoughts or experience? Thanks