Snow blowers

[Harry Niemann]

What's the best chute spray to prevent clogging?

[Rod Sheridan]

Hi Harry, I use Armor-All.

Regards, Rod.

P.S. Must be that time of year, I got up, looked out the window and wondered if I should go back to bed until February 2 or clean off the van and go to work.

[Paul F Franklin]

I use one of the sprays containing teflon. It works fine, but has be reapplied often.

[Mike Cutler]

I modified the snow blower by closing the gap between the impeller, and housing, with rubber gasket material. I've never had the chute clog, it's always been the impeller housing that was the cause.

[Carl Beckett]

I have one I painted with a graphite paint, dont remember the exact name but it is slick and doesnt wear off quite as quickly as a spray. PAM cooking spray, auto spray wax, etc... are all viable choices.

[Bill Dufour]

I have heard candle wax and blowtorch.
Bill D

[Lee Schierer]

Before each use, I spray the chute, impeller and augers with silicone. It's been many years since I had a clogged chute.

[Earl McLain]

Silicone here as well--but only 2 or 3 times a season. Running a 30" Troy Bilt, good blower. But, i live on a State Highway, and 3 seasons back the State changed "salt" formulation. Now when i get out by the road it's a nasty sludge, and refreezes behind the impeller. In that same period of time i've also noticed that small pines along State Highways in our corner of the state tend to be brown on the highway side of the trees--and they weren't before.
earl

[Jeff Body]

Full disclosure: I live in Florida and I've never seen a snow blower.

I wonder how a ceramic sealant like you use on your car would work. There's a full ceramic coating or even a ceramic detail spray.
It makes everything slide right off your car when used.

[Ole Anderson]

I have had Toro paddle style snowblowers for 40 years and never had to spray the plastic chutes.

[Grant Wilkinson]

Here in the Great White North, we get a lot of wet, heavy, slushy snow for about 5 months of the year. But, I'm not complaining. I've tried silicone sprays, Armor All, graphite sprays and the wax that I use on my table saw. I get the same results from dollar store vegetable oil spray for a lot less money.

[Bob Turkovich]

I have had Toro paddle style snowblowers for 40 years and never had to spray the plastic chutes.

I would have made this exact statement - word-for-word - 24 hours ago...

9 1/2 inches of wet snow with an icy base and the chute plugs every 5 feet or so

Thanks for the jinx, Ole! (At least I now know how to address it.)

I guess I'm about 15 miles SE of you. Can you still make the statement after today's snowfall?

[Myk Rian]

What's the best chute spray to prevent clogging?

The thrower chute and auger box are the only reasons I have silicon spray in the shop.
I also use it on my snow shovels.

[Bruce Wrenn]

What's the best chute spray to prevent clogging?

Move to North Carolina like the rest of them have. Would the last person leaving New Jersey / Pennsylvania please turn the lights off.

[Steven Cooper2]

I have had good luck with silicone as well. I probably have tried some teflon spray but results were about the same.