Thanks for the ideas. This saw is going to live in my basement (not my shop) so it's going to have to be mobile. Being a left tilt nothing can be too close to the right side of the saw because of the tilt wheel. I could make a cabinet on it's own wheels but I think that's more than I want. The saw main use is going to be cutting wedges to make segmented bowls but because it came with the full length fence rails and a router built in I'm not going to cut or replace the rails yet.
I picked up a couple of those cheap vinyl coated steel hooks from the hardware store. I have lots of incredibly strong magnets so I think I'll weld a flat piece of steel to the hook and try that combination for now. With plenty of ideas I'll keep them in mind. I may decide down the road that more storage is needed.