bandsaw blades

[John Christian]

favourite/best blade for cutting radius's in 3/4 lumber with 14" bqnd saw

[Rod Sheridan]

favourite/best blade for cutting radius's in 3/4 lumber with 14" bqnd saw

Hi John, that would depend upon the radius being cut.

Without knowing that I would suggest either a 1/4" to 1/2" 6TPI blade............Regards, Rod.

[John Lanciani]

1/4" x 6tpi Lenox Diemaster 2 bi-metal.

[tom lucas]

1/4" x 6tpi Lenox Diemaster 2 bi-metal.

Second the recommendation for Lenox bi-metal. Love those blades. Depending on material, you might want higher TPI. I run 1/4- 14/18's. They are great for plys and thinner stock but also cut good even through thick materials.

[Bruce Wrenn]

Second the recommendation for Lenox bi-metal. Love those blades. Depending on material, you might want higher TPI. I run 1/4- 14/18's. They are great for plys and thinner stock but also cut good even through thick materials.

Third vote for this blade. Contact John at Woodcraftbands for the very best service.