I recently purchased the Dewalt 735 planer and it came with the mobile stand. The stand included two levelers to stabilize it in use but to adjust them you need to get down to the floor and work nuts against the top and bottom of the cart. I had hoped to adjust once and be done but my garage floor is anything but flat not counting the pitch to the door. Now my knees are way out of warranty so I got a pack of levelers from Woodcraft that you can adjust from the top. LEVELERS-WELD-NUTS.jpgI had some 3/8"-16 weld nuts which are like tee nuts without the prongs. Using a step bit I drilled out the original holes to 1/2" to take the weld nuts. I drilled two mounting holes in each weld nut and pop riveted them to the bottom of the frame.POP-RIVeTED-IN.jpg Now I just have to bend down and use a screwdriver to adjust them. Let me know if you think it is a good modification. INSTALLED.jpg