Results 1 to 5 of 5

Thread: New Member Intro: High Mountain Woodcrafters

  1. #1

    New Member Intro: High Mountain Woodcrafters

    I’ve been following SMC for the past year and getting ready to Crank up my Shop as I prepare to retire.
    Turned the Big-70 today and planning to make a run as a Solo shop. I concentrate primarily on Primitive/Shaker style pieces.

    In the process of Building a Finish Room onto my 600 Sq. Ft. shop.
    Also planning to order a Woodland Mills HM-126 in Nov.
    Have approx. 30 nice Chestnut Oaks/Rock Oak (I think??) on the ground.

    Wanted to thank all of you Members for sharing as I’ve picked up a great deal from planning, designing, and building my Shop, and in preparing to formally Launch my shop as a supplemental opportunity.
    If you get a chance, check out my Website and tour my Humble shop!

    With much Appreciation!

    Bruce N.
    Last edited by Keith Outten; 10-27-2019 at 4:01 PM. Reason: Removed direct link in signature - not permitted by TOS

  2. #2
    Join Date
    Jun 2013
    US Virgin Islands
    Blog Entries
    Congratulations! Welcome to the creek. Not a lot of folks follow the member interviews section, so you might not get a lot of replies here. Sounds like you do a lot of hand tool work. The Neanderthal forum has some good knowledge there.

  3. #3
    Welcome Bruce, and congratulations on your impending retirement!
    "All that is necessary for the triumph of evil is that good men do nothing."
    - Sir Edmund Burke

  4. #4
    Join Date
    Feb 2019
    Averill Park NY
    Bruce, welcome to the forum.
    Some Blue Tools
    Some Yellow Tools
    And a Pet Grizzly
    Blue and White 50 Watt

  5. #5
    Join Date
    Feb 2013
    Duvall, WA
    Congrats, Bruce on your upcoming retirement! And don't forget that the Creek likes pictures!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts