Hello, I have the Beale Collet Chuck system which doesn’t include the 5/16 Collet. Where can I get one.
while I am ordering I would also like to get a 6 mm Collet. Any help would be appreciated.
Thanks, Kevin
Hello, I have the Beale Collet Chuck system which doesn’t include the 5/16 Collet. Where can I get one.
while I am ordering I would also like to get a 6 mm Collet. Any help would be appreciated.
Thanks, Kevin
The collets are ER32, a industry standard. They are easy to find on the web in any size you can imagine. A set of collets may be more cost effective than buying a few specific sizes. A 6 MM collet is almost interchangeable with a 1/4 in since they will accept about 1/32 in variation.
Jim