Hi folks, looking for some dent repair advice. An unfortunate incident in which a metal object fell onto the top of an Ethan Allen hard maple dining table top caused a dent/gash. Looking for advice on whether to attempt DIY fix or pay $200 to their repair service. I assume the matte finish is catalyzed laquer. Here are photos of the dent and the table. The main dent is between 1/16 and 1/32" deep, the secondary dent is about 1/64" deep, and there is a minor mark/scratch off to the side. Photos attached. What do you suggest? Thanks!IMG_1711.jpgIMG_1712.jpg