Hi all - I am hoping someone can help me trouble shoot this problem. It has the 4.5 HP Baldor motor. Motor plate says it draws 18.2 amps. I don't know much about electrical. enough to be dangerous. This is a 2007 Italian made machine. It worked fine on my 30amp circuit for as long as I've owned it. Now suddenly it won't start. I have checked the open door with, foot brake switch, the red kill switch above the starter. I've blown out all the electrical areas I can get to. There is no blade on the machine now. I can hear a slight hum near the switch when I plug it in. I can't remember if that's normal. Never really paid attention to it before today.
Anyway, like I said, I'm hoping someone can help.
Thanks in advance.
Ron