once all the parts are digitized and the final file is created *.dxf
then a toolpath and nesting will be done for a cnc cut
https://youtu.be/CgnaFZYqU8U utube reference
once all the parts are digitized and the final file is created *.dxf
then a toolpath and nesting will be done for a cnc cut
https://youtu.be/CgnaFZYqU8U utube reference
Hi Stan,
Did you use the Jumbo Logic Trace digitizing board for this. Looks great!!
David
yes I did use the jumbo boards, project this size it did a good job