Full Mortise Lock - Source?

[Tom Blank]

I'm building Gerstner styled tool chests for myself and two sons and have run into some difficulty finding a smaller sized full mortise lock to secure the front panel in the closed position. Found one at WoodCraft that would work except it is a dark bronze finish and I'm using Nickel hardware. WoodCraft says no Nickel finish available from the manufacturer. The lock will be mortised into the 1/2" edge of a 2" wide rail. full-mortise-small-box-lock

I've searched every vendor I know of and have not found much to choose from. I did find a cam lock on McMaster-Carr that might work but was hoping for a full mortise or, second choice, a half mortise style.

Thanks for any assistance.

Tom

[Phil Mueller]

Tom, you might want to search the vintage/reproduction vintage hardware sites...just google vintage hardware and a number of suppliers will show up.

[Joel David Katz]

Did you look here:

https://www.houseofantiquehardware.c...-cabinet-locks

This one would seem to fit the bill:

https://www.houseofantiquehardware.c...1&category=114

[Tom Blank]

Phil, Joel,

Thank you for the ideas. Lots of items to review out there.

Tom