I've got the 3HP cyclone dust collect from Laguna, model MDC3560-0145.
It's been discontinued from Laguna's lineup.
I'm wondering where I can get a new barrel, or where I can get the wire cage that goes in the barrel.
Anyone know?
I've got the 3HP cyclone dust collect from Laguna, model MDC3560-0145.
It's been discontinued from Laguna's lineup.
I'm wondering where I can get a new barrel, or where I can get the wire cage that goes in the barrel.
Anyone know?
Last edited by Jim Becker; 09-25-2019 at 9:18 PM. Reason: Defaulted font back to normal size to make it more readable
Have you contacted Laguna?
--
The most expensive tool is the one you buy "cheaply" and often...
You don't have to use Laguna parts for the bin or the bag holder. For instance, here's a current thread about DC bins. https://sawmillcreek.org/showthread....lection-barrel
'Had to ask...
Jamie is correct...you should be able to use a variety of commonly available stuff to replace the bin if it needs to be replaced for some reason. 35 and 55 gallon containers are somewhat standard. Worse case, you may need to re-engineer the connection to the cyclone if Laguna did something, um...one-off...in their design.
--
The most expensive tool is the one you buy "cheaply" and often...
Thanks.
I guess this barrel is 60 gallon.
It's that "cage" that goes inside the barrel that has me stumped mostly.
I'll check out the link that Jamie posted, to see if cages like that are avail elsewhere.
I'd like to start using bags in the barrel, but I need that cage, to hold it down.