Completed the first of six Michigan themed Adirondack chairs. Using the soaking wet ground contact Cedartone wood from Menards. I would like to use the KDAT wood, but can't seem to find it locally. 1/8" masonite template for each piece. Rough cut on the bandsaw, then using a pattern bit to finish it. Still needs touching up on the contours. Think I need to add an inexpensive spindle sander to the shop. There seem to be a ton of them out there from the same factory. Triton, Shop Fox, Wood River, Grizzly, Harbor Freight, Wen and so on, similar but probably not equal. Wen is the cheapest at $113, with Grizzly at nearly $200. Local dealer carries the Triton at about $170. Any recommendations?
Mich chair.jpg