Rust prevention

[Timothy Thorpe Allen]

Larry, I used a dresser drawer lined with a tarp to soak a 28” saw blade in EvapoRust....

[Erik Loza]

What I like to do is apply the wax to the machine with an orbital sander with a automotive scotchbrite pad on the sander. The scotchbrite pad will adhere very well to the hook and loop. Of course it ruins the sander for other applications but I got a cheap HF sander I use for that purpose only. With the scotchbrite pad you end up polishing the metal at the same time.

This exactly how I do it. ^^^

Also, not so much for surface protection but I guess for uncoated/plated steel parts inside the machine, the factory puts these little stick-on thingies all over the inside of our edgebanders...

https://www.zerust.com/products/vci-...ule-diffusers/

Erik