Hello, perhaps someone here can help me with this. I want to turn some Skittle pins for my table top skittle game, and would like to make sure they are identical. Since the pins are to be 3" tall, 1 1/8 in the middle and 3/4" at each end. I plotted the whole thing out and I'm thinking of making a tool that would do the cutting all at one time since so little is actually coming off a 1 1/18 dowel. Here's my question, if I build this tool what kind of tip should I put on it, square, beveled back at the bottom. I'm including what these pins are supposed to look like, any idea on how to make the little cup on each end would be a bonus. I have an idea but I just thought I'd throw that out there Thanks in advance, Roger
skittles2.jpg