-
I built two trays that stack and fit in the file, scraper, and diamond hone drawer. Bases are 1/8" Masonite, ends and dividers are 1/4". Slots are cut deep enough the files are all slightly below the top edges of the vertical pieces. Miscellaneous stuff fits at the ends.
IMG_2769.jpg
-
Very nice Tom! Also, similar to what David describes above.
-
My 30 year old wood and metal files are hanged on my tools panel.
My needle files are into a box without dividers because their small mass will not compromise their functionality if they eventually move inside.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules