Results 1 to 4 of 4

Thread: Jointer Planes #8 for sale (Warning Picture Heavy)

  1. #1
    Join Date
    May 2006
    Location
    Bay Area California
    Posts
    192

    Jointer Planes #8 for sale (Warning Picture Heavy)

    I have 2 jointer planes for sale

    I have a # 8 Stanley Bailey that I purchased from rarebear (formerly at woodnet, John Kleso). This Stanley has a smooth bottom Here is how he described it to me when he sold it:
    --------------------------------
    I have a No.8 that has some mis matched parts on it that will not hurt the way it works.. The frog is from a new type that the rear of the plane. It has been tuned and sharpened.
    ---------------------------------

    I am looking to get $ 120 plus shipping (probably $ 15-25 depending on your location). About 10 pounds.


    The other one is a K8 as described to me when I bought it here.

    Keen Kutter K8 (Bedrock) Plane
    Keen Kutter K8 corrugated jointer plane for sale. This Keen Kutter is identical to the Stanley #8 roundtop Bedrock series. Stanley made these planes and the only difference is the graphics in the castings.

    This K8 has had the sole and the sides very carefully and precisely surface ground(done by a very good machinist)so that they are dead flat and square. There is no deviation greater than .001. Both sides are dead square to the sole. The mouth is perfect and square to the sides.

    The Bedrock frog is in excellent condition with no chips, cracks or repairs. It is dead flat. The mating surfaces between the frog and the plane body are excellent with absolutely no wobble.

    The small diameter depth adjustment knob works flawlessly with very little lash, maybe a full turn. The lateral adjuster mechanism works flawlessly as well.

    The lever cap is without a flaw.

    The knob and tote are made from nice wood(I'm not sure of the species)with just a very small chip off the base of the knob. The tote is pristine, no chips cracks or repairs.

    The Keen Kutter blade is nearly full length and is fully sharpened and ready to go. The back of the blade is dead flat. No rust or pitting on the blade.

    The plane body has been re-painted but there was no rust present on the plane before repainting.

    This plane is in very excellent condition and everything works as it should. It easily flattens and straightens long lumber. If one were to put a Hock replacement blade in this plane, you would have a plane as good as any #8 out there.


    I am looking to get $ 180 + $ 15-25 shipping depending on your location.

    I will be shipping from CA 94089. Shipping weight about 10 pounds.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	K851.peg.jpg 
Views:	78 
Size:	119.8 KB 
ID:	415964   Click image for larger version. 

Name:	K831.jpg 
Views:	71 
Size:	163.1 KB 
ID:	415965   Click image for larger version. 

Name:	K8_21.jpg 
Views:	56 
Size:	115.0 KB 
ID:	415966   Click image for larger version. 

Name:	K8_11.jpg 
Views:	60 
Size:	166.6 KB 
ID:	415967   Click image for larger version. 

Name:	Bailey11.jpg 
Views:	53 
Size:	177.8 KB 
ID:	415968  

    Click image for larger version. 

Name:	Bailey21.jpg 
Views:	54 
Size:	128.5 KB 
ID:	415969   Click image for larger version. 

Name:	Bailey31.jpg 
Views:	54 
Size:	127.5 KB 
ID:	415970   Click image for larger version. 

Name:	Bailey41.jpg 
Views:	50 
Size:	127.8 KB 
ID:	415971  

  2. #2
    Join Date
    May 2006
    Location
    Bay Area California
    Posts
    192
    The K8 plane is sold.
    The remaining Bailey plane is a screaming buy for a jointer plane.

  3. #3
    Join Date
    May 2006
    Location
    Bay Area California
    Posts
    192
    Price dropped to $ 120 including shipping in the continental USA. SOLD
    Last edited by Vijay Kumar; 09-17-2019 at 2:34 PM.

  4. #4
    Join Date
    May 2006
    Location
    Bay Area California
    Posts
    192
    SOLD this morning.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •