Decided it's time for a vase

[John Hart]

Well it's been a while since I've turned a tall vase so I figured I'd get to it. Don't want to use a hollowing rig....just go the old fashioned way with a big stick.
This is Bertha's big sister...made it a few years ago. Basically an old shovel handle that I cut off and inserted a hefty piece of steel deep inside. The shaft takes 3/8" cutters that I make out of old printer drive shafts. She's 3 feet long and gives me plenty of control even with deep hollowing.
20190907_085018.jpg
20190907_085028.jpg

[John Hart]

Today's experiment is with ambrosia maple. I have a 4" slab that has been drying for about 6 years.
Cutting a 15" piece for this project.
20190907_084834.jpg
20190907_090948.jpg
20190907_093007.jpg
20190907_094626.jpg

[John Hart]

First thing is to cut the basic profile. Using a skew mostly and a bowl gouge for the neck.
My main concern is to create a gentle curve up the length. No straight sections allowed
20190907_100902.jpg
20190907_104314.jpg

[John Hart]

Now it's ready for hollowing. I'm mounting it up in my steady rest. A fine tool that Dennis Peacock made for me years ago.
20190907_105337.jpg
Drill a hole to get things started
20190907_105502.jpg
And I also want to mark my desired depth on the hollowing tool
20190907_110519.jpg
20190907_110548.jpg

[John Hart]

The hollowing tool also accommodates a 3/8 forstner bit so I can drill my guide hole deeper and deeper as I go
20190907_113025.jpg
Basically I hollow just in the center alternating between the cutters and the drill bit until I get to the bottom
20190907_120053.jpg

[John Hart]

Once I reach my mark on the tool shaft it's time to hollow outward toward the profile. I'm shooting for a 3/8 to 1/4 inch wall.
20190907_121233.jpg
I leave plenty of material on the mouth and neck to use as leverage when I'm really deep. In this case...11 inches.
Then after hollowing is complete, I clean up the inside and the mouth to my desired thickness
20190907_125057.jpg
20190907_125322.jpg
20190907_130407.jpg

[John Hart]

Once the inside is done I remove the steady rest and finish up the pedestal and get all my sanding done.
20190907_134931.jpg

[John Hart]

Then on to finish. Using clear gloss enamel for the first time. Have to see how it turns out
20190907_150233.jpg

And that's it!!
Thanks for peeking

[Frederick Skelly]

Another beauty, Sir! I'm in awe of how productive you are - every week you turn out (pun intended ) another beautiful piece!
Fred

[John Hart]

Geez... thanks, Fred.
Gonna make my head swell.
I sure enjoy my time in the shop. Don't get much but try to make the best of it

[Ken Fitzgerald]

Good form and well documented! It's good to see you posting again John!

[John Hart]

Thanks Ken. Nice to see you again my friend. Been gone too long.

[John Hart]

Not impressed with the clear enamel. It dries fast but just ain't the cat's meow.
Sanded it off...switched to old reliable....lacquer. (hic) 'cuse me

[John Hart]

Here's after the lacquer. It'll need one more coat after curing
20190907_192312.jpg
20190907_192325.jpg

[Robert Hayward]

Very nicely done, the vase and the pictorial. Thanks for taking the time to post it. I really like your steady rest. Simple and functional. What size is the square tubing that forms the ring ?