I have been doing some building of shop stuff for storage and I am having a problem with the pocket hole screws coming through the other piece of plywood. I am using 3/4" plywood and the recommended screw size is 1 1/4". The tip of the screws keep popping through about 1/16 - 1/8" and I have to use my angle grinder to cut them off. I have shortened the length of the pocket hole drill, down to about 1/8" less than the recommended length for 3/4" wood with the same outcome. Should I be shortening the drill length even more or am I doing something else wrong?
Stu