Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Any tips on sealing MDF?

  1. #1
    Join Date
    Feb 2003
    Location
    In the foothills of the Sandia Mountains
    Posts
    15,088

    Any tips on sealing MDF?

    Iím looking for tips on how to seal the edges of borg bought MDF to achieve a glass smooth paint finish. Iíve heard of mixing yellow glue & water. Are there alternative methods?
    Please help support the Creek.

    When everything is coming your way, you're in the wrong lane.

    - Steven Wright

  2. #2
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    6,167
    I've used lightweight joint compound several times and it seems to work fine. Just smear it on with your finger or flexible plastic spatula, let dry, then sand. Inspect, repeat where needed.

    John

  3. #3
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    19,709
    I am familiar with modern idioms but they are outside the vocabulary of what I want to say.

    - George Dyson (composer)

  4. #4
    +1. Shellac is perfect for this.

  5. #5
    Join Date
    Feb 2003
    Location
    In the foothills of the Sandia Mountains
    Posts
    15,088
    Iíve tried Zinsser spray on shellac and it never has worked for me, maybe I needed more coats. Iím going to try the joint compound and see if that works on some small signs for my daughters church.
    Attached Images Attached Images
    Please help support the Creek.

    When everything is coming your way, you're in the wrong lane.

    - Steven Wright

  6. #6
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    19,709
    The spray shellac, while handy to have around, has never really been a replacement for Seal Coat in my shop. I use it for many things. A shellac primer like Zinsser BIN may do two jobs at once for you prior to painting.
    I am familiar with modern idioms but they are outside the vocabulary of what I want to say.

    - George Dyson (composer)

  7. #7
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    49,980
    Something that's now on my radar for this kind of thing as well as grain filling on guitar bodies is Z-Poxy.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  8. #8
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    6,167
    Quote Originally Posted by glenn bradley View Post


    Does shellac really seal the edges?

    John

  9. #9
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    27,071
    I have used Zinsser's Sealcoat and wipe-on poly.
    Ken

  10. #10
    Join Date
    Jan 2009
    Location
    Lawrence, KS
    Posts
    480
    I can't answer for Glenn but I've done the same. Shellac sealed the edges but it took multiple coats. Just kept at it until it looked right.

    And the magical BIN primer also worked.
    Don't sweat the petty things and don't pet the sweaty things.

  11. #11
    Join Date
    Oct 2007
    Location
    Rutherford Co., NC
    Posts
    1,125
    Back when I was making painted pedestals all the time, regardless of the material - ply, solid lumber, MDF - my process was the same: assemble with carefully aligned joints, either joint compound or Rock Hard Water Putty, sand, KILZ, paint.
    "Live like no one else, so later, you can LIVE LIKE NO ONE ELSE!"
    - Dave Ramsey

  12. #12
    If you are painting, I think it's easier to veneer tape the edges. I haven't seen any in a long time but they used to make a paper tape that gave the edge the same surface as the face. If you are putting a clear finish on I just use number of coats of sealer.

  13. #13
    Join Date
    Jun 2005
    Location
    Meredith, NH
    Posts
    113
    I use Bondo or a similar type of body filler - the brand is not that critical.
    It works well on plywood too.

    Regards,
    Phil
    "If you want things to go right, pay attention to everything that can go wrong"

  14. #14
    Join Date
    Mar 2019
    Location
    Los Angeles, California
    Posts
    92
    I use shellac for my MDF jigs

  15. #15
    Join Date
    Jul 2015
    Location
    North Virginia
    Posts
    338
    Quote Originally Posted by Jim Becker View Post
    Something that's now on my radar for this kind of thing as well as grain filling on guitar bodies is Z-Poxy.
    Jim - this is a new one to me. Can you tell us a bit about your experience with Z-Poxy?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •