Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: Help Please

  1. #1

    Help Please

    I designed a Christmas ornament and during that process I had to convert the design to an object so I could use the eraser feature as the virtual delete tool was not working right. It would take out more then what was needed.
    Anyway when I cut the design it cuts it twice, once for the hairline design and again for the object. I don't know how to get rid of the object part of it. Can anyone tell me how. Thanks
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  2. #2
    Bert

    In over 20 years I've never had the need to convert a drawing to an object but if you post the drawing I'm sure we'll figure a way.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

  3. #3

    cdr file

    Quote Originally Posted by Mike Null View Post
    Bert

    In over 20 years I've never had the need to convert a drawing to an object but if you post the drawing I'm sure we'll figure a way.
    I have attached many cdr files but now its not working did the way to attach a file change
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  4. #4
    this is crazy I see noway to attach a cdr file ive done this a dozen times whaqt has changed
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  5. #5
    I hope I was able to attach a JPG that shows the basic steps.

    Ralph
    Attached Images Attached Images

  6. #6
    AZPGR XMAS ORD.cdrok don't know what happene but know it works heres my file
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  7. #7
    What version corel did you save as, my x4 won't open it-
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE- make that FOUR now - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  8. #8
    x5 was my version
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  9. #9

    hope this is in a lower version

    Backup_of_AZPGR XMAS ORD.cdr
    hope this is in a lower version
    Attached Files Attached Files
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  10. #10
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,951
    Blog Entries
    1
    AZPGR XMAS ORD.cdr

    Here you go. I used the virtual segment delete to remove the second pass.
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
    SFX 50 Watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic 100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
    Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others

  11. #11
    Thanks John but how did you do it. all I see was 1 hairline and an object below it. Didn't see anyway to separate them
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  12. #12
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,951
    Blog Entries
    1
    I could see that there was two outlines, tried to just do smart fill, but it left odd tabs at overlap. Then just selected item and then clicked on the VS delete and used it to delete parts. Had to do about 7-8 separate deletes. If you snuck up on segment from above or from side, you could select only one pass.
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
    SFX 50 Watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic 100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
    Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others

  13. #13
    Virtual delete wouldn't work for me kept taking out more then what I needed making it un usable thats why I made it an object to use the eraser which will not work with curves
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  14. #14
    Bert
    I decided to re-draw it but got way-layed by some orders. I had planned to fit text to a path for the AZ and change the size of the "9" in 2019. At that point I would have used weld on all the text.

    I don't know if that would have achieved your objective but that was my plan.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

  15. #15
    Bert,

    I cleaned it up so that it would hold together better. Kept the gaps and lengths to be about 0.050" The "9" is somewhat problematic, so use it if you want.

    Ralph
    Attached Files Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •