Quote Originally Posted by Warren Mickley View Post
Mark, it appears that I was wrong about the nickers on the Gordon plane, that it is one iron with two knives.

I received an email from Steve Voigt today on another matter. He wrote it this morning but I only read it this evening. He mentioned that he will be at the Hearne Lumber open house (Oct 4,5) and will be showing his dado plane among others. It does not seem to be on his website, but it might be similar to one in the Seaton chest. He lives near Allentown.
That would be good if Steve was making a dado plane. That open house at Hearne looks interesting - I have not been to Hearne in many years. Have you been to the open house? If yes, was it worthwhile? I talked to Terry Gordon about the whisker difference between nicker & blade and he said, if I wanted, I could grind a couple thousands off the edge of the blade.