Seems lots of good discussion about Dust Collection, so I'll ask too.

Looking at the Clear Vue Pentz EF5 with an 8" intake.
The Idea would be to run the 30' main line at 8", branches at 6", and down lines at 4" or 6" depending on the machine.

Plan on going to go with PVC just due to the low friction, and low cost.

I have asked Clear Vue for recommendations...and didn't get a response (yet).
This is the preliminary design, based on what I've been reading... any thoughts / feedback?
Pretty simple.. couple sweeping Wyes.

Duct-Layout.png