Not sure what else to call it but what are the best ways other than a sharp tool to combat the rash that you get on end grain when turning dried wood. If you look close you can see it on this kiln dried maple. There is a tiny bit of small tear out but even during sanding I get a hazy looking result that is what I’m calling a rash. Hopefully my question makes sense. Thanks.

262AAC98-263A-46F1-B04D-743F409AC78D.jpg



Here are pics of the overall bowl
9227D6D3-F101-43A3-ABC8-F13F959CE8C0.jpg
C7D8ADAB-3246-4756-A56C-2E38894E2F87.jpg