Results 1 to 5 of 5

Thread: Built In Bookcase Design

  1. #1
    Join Date
    Jan 2009
    Location
    N.E, Ohio
    Posts
    2,730

    Built In Bookcase Design

    I am in the throws of designing a built-in bookcase for our family room. It will replace a dry bar that was done when the house was built 20 yrs ago.

    Given things for I have to deal with:

    The area is between to walls.
    There is a soffit over the area which is 22 inches deep (from back wall to front edge) it has two can (pot) lights. The soffit and can lights must stay as I do not want deal with the removal.
    There is an electrical outlet in one sidewall which also must remain, do not want to deal with tracing circuit. I am guessing it is part of a daisy chain.

    Plan is to have base cabinet 36" high with a wood top and doors on the front. Book shelves above from counter top to soffit.

    Question:

    Put a wood back on the bookcase? Bookcase will match house trim - stained red oak. Plan to have a face frame on the bookcase.

    Thanks for your input.
    George

    Making sawdust regularly, occasionally a project is completed.

  2. #2
    If it were me, I would put a wooden back on it and stain it to match. You don't have to, but it will make the bookcase look more "finished" - like a piece of funiture and less like a nice set of shelves. You will also not see the white wall behind any gaps in the books or nic-nacs.
    Fred
    "All that is necessary for the triumph of evil is that good men do nothing."
    - Sir Edmund Burke

  3. #3
    I like bright fabric for the backs. You see it used like that in fine private libraries. Silk moire is great as it reflects light
    and shimmers.

  4. #4
    I would put a back on it just to avoid having to paint the wall behind should you ever change room paint colors. And I agree it would look nicer. Also, the wall behind is likely not perfectly square and plumb, so you are likely to see uneven gaps between the shelves and the wall behind....

  5. #5
    Join Date
    Aug 2008
    Location
    Fripp Island, SC and Darien, IL
    Posts
    20
    We used plywood beadboard as the back. PB010001.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •