Results 1 to 5 of 5

Thread: WTB: STANLEY #6 blade/iron

  1. #1
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,423

    WTB: STANLEY #6 blade/iron

    Long shot but I will ask:
    Anyone have a spare #6 iron/blade ideally STANLEY that I could purchase? I have chipbreaker...
    Please let me know, Thanks,
    Jerry
    Jerry

  2. #2
    Now is the opportunity to upgrade the blade. Buy a blade from Hock.

    Mike

  3. #3
    Better yet, get a PM-V11 blade from Lee Valley.

    Mike
    Go into the world and do well. But more importantly, go into the world and do good.

  4. #4
    Join Date
    Jan 2007
    Location
    Michiana
    Posts
    1,303
    I think I have one Jerry. I’ll check and send a PM.
    Sharp solves all manner of problems.

  5. #5
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,423
    My apologies.. I discovered on a back shelf in my shop a set of parts for a Stanley #7. Of course, the iron works perfectly on a #6 Bailey. Sorry for my oversight.
    I often buy things with good intentions and then, they end up a never used shelf....This is one of the few times, they will actually be of use,
    Thanks much for your responses....Rob, I'll send you a PM.....Thank you all. As I used to tell my kids: THINK before you ACT...
    Jerry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •