Results 1 to 7 of 7

Thread: Woodhardener

  1. #1
    Join Date
    Jul 2009
    Location
    West Boylston Massachusetts
    Posts
    525

    Woodhardener

    Hello, I am painting a Farmers Porch. While doing a ton of preparation, I noticed that one of the floorboards is a little punky. (Left side out of the way). I am thinking of trying a wood hardening product. The wood is tongue & groove fir. Any suggestions on a product that will hold up outside.
    Thanks in advance, Kevin

  2. #2
    Join Date
    Apr 2005
    Location
    Central MA
    Posts
    1,247
    Hi Kevin,

    I've used rotfix from system 3 outdoors with great results; https://www.systemthree.com/products...x-epoxy-sealer

  3. #3
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    19,675
    Blog Entries
    1
    We bought a multi-step process at Home Depot. The first part is sold separate from the second part. My wife did the patching. She did not like it. It seemed okay to me but she may have added too much hardener to the putty.

    As always, YMMV!!!.png

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  4. #4
    Years ago, I had a problem with an indoor window sill for an attic window that had been left open for a couple years. (Before I bought the place.) The wood was about the consistency of styrofoam. I could push a screw driver deep into the wood. I used some stuff called Wood Petrifier. It was like water. I got the wood as dry as possible and then brushed the stuff on. I kept brushing it on as long as the wood soaked it in. When it wouldn't take anymore. I blotted up the excess with a paper towel and left it dry for a couple weeks. The surface of the wood got tough much like the tough plastic that truck bed liners are made of. I lightly sanded it and painted. It stayed good for another 20 years. (the house burned down due to a faulty freezer)

  5. #5
    While I've never used it myself, many boaters I associate with online swear by 'Git Rot'- might be worth a look.
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  6. #6
    I've used MinWax wood hardener and was satisfied with the results. It won't help if the wood is too far gone, but for moderate punkiness it works pretty well.
    Lee Schierer
    USNA- '71
    Captain USN(Ret)

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  7. #7
    I have used both Git Rot and the Minwax over the years. Both are great for endgrain like the feet of wooden picnic tables. I make a masking tape dam and then fill it and watch it get absorbed. I had a picnic table which was left outdoors all year n the ran and snow and everything rotted away over the years except the bottoms of the uprights.
    Dave Anderson
    Chester Toolworks LLC
    Chester, NH

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •