[OP]
Member
Hi All,
I have a friend who has asked me to make a medal hanger for his wife (see . but he want the textcut out above the hanger. Is there a way / font do do this without using metal tape to stop the laser cutting the base of the text off.
Medal-Hanger-Medal-Display-Medal-Organize-My-Medals-Sport-Stainless-Steel-Medal-Holder-ITM-ART-5.jpg
Cheers
Bill
P.s. im using a Ttrotec speedy 300 and coreldrw 12 or 15
Last edited by bill liscombe; 08-08-2019 at 12:06 PM.
Contributor
In Corel, just place your text along the top edge of the hanger graphic, select/group both, and use the 'weld' function, it'll connect the words to the graphic..
weld.jpg
Last edited by Kev Williams; 08-08-2019 at 1:38 PM.
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Moderator
Bill
You can do this with your CorelDraw program. Use the weld tool to weld the text and the hanger together.
WELD EXAMPLE.cdr
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
[OP]
Member
Hi All,
Thanks for the help , Ive now done it. I struggled abit at first as I am working nights at the moment which isnt the best time for thinking. then realise I had to weld the text after converting it to curves and then weld it to a box as the hanger file was not one piece.
Posting Permissions
Reply With Quote