Results 1 to 7 of 7

Thread: Need help with designing the end of an enclosed desk

  1. #1
    Join Date
    May 2007
    Location
    Florida
    Posts
    624

    Need help with designing the end of an enclosed desk

    I知 building a desk for my daughter. I値l be turning the legs and creating a stack of drawers on the right side. I知 trying to figure out how I would create a panel on the end without running into problems with wood movement. I will join the top of the two legs with a apron and the bottom with a stretcher. This design will be sort of Victorian and painted white. I prefer to use solid wood but I am considering using a plywood panel in a groove in the legs and the apron and stretcher. I am also thinking about gluing up a panel horizontally in which the ends will be let into a groove in the frame. I also considered making a frame and panel but it looks weird to me to have the stiles stop at the apron and stretcher.

    I can稚 find any examples of a desk like this that is made from solid lumber. Any thoughts would be appreciated.

    Thanks Dan
    image.jpg
    Last edited by Dan Hahr; 07-18-2019 at 10:02 AM.

  2. #2
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Quality Lattice?
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    典he problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  3. #3
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,595
    Blog Entries
    1
    I see no problem using solid wood in your design. The wood will move seasonally so you need to allow for it. Look up the amount of movement you can expect for the species you select and allow for half of that movement in the grove depth in each leg (grain vertical). Anchor the panel in the center of your stretcher with a single brad or a small patch of glue. Paint your panel complete before assembly so that if it does shrink you won't see bare wood. You might need to allow for the paint thickness in your groove widths. I would use either soft maple or yellow poplar for the panel, both woods paint well.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  4. #4
    Join Date
    Mar 2003
    Location
    San Francisco, CA
    Posts
    10,304
    If you are going to paint it, there's no downside to plywood. A plywood panel will not contract and reveal unpainted material which used to be inside the dado. A plywood panel can (and should) be glued all around, so it turns into a great big stiffening gusset for the joinery. Use plywood.

  5. #5
    Join Date
    May 2015
    Location
    Ingleside, IL
    Posts
    1,417
    I would probably go with the plywood as Jamie suggests. I would also enclose the drawers, in the same manner, on the inside as well. If you go with a solid wood panel, my vote would be poplar.

  6. #6
    Join Date
    May 2015
    Location
    Ingleside, IL
    Posts
    1,417
    Thanks for the movement chart, Lee. Had not seen that before.

  7. #7
    Join Date
    Apr 2013
    Location
    Kansas City
    Posts
    2,652
    Go with the plywood. Its not cheating.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •